Brainchild Electronic Co., Ltd
Product Name:
VR06 6 - channel paperless recorder
Features:
Specification:
90-250VAC, 47-63Hz, 60VA, 30W maximum
11-18VDC or 18-36 VDC, 60VA, 30W maximum
Display
6.4〞TFT LCD, 640X480 pixel resolution, 256 colors
Memory
8MB storage memory on board
Storage media: 128, 512 MB, 1 GB CF (Compact Flash) cards
Analog Input Cards (AI181, AI182, AI183)
Channels: AI181 ~ 1 channel, AI182 ~ 2 channels, AI183 ~ 3 channels
Resolution: 18 bits
Sampling Rate: 5 times/ second
Maximum Rating: -2 VDC minimum, 12 VDC maximum (1 minute for mA input)
Temperature Effect: ±1.5 μV/ μC for all inputs except mA ±3.0 μV/ μC for mA
input
Sensor Lead Resistance Effect:
T/C: 0.2 μV/ohm
3-wire RTD: 2.6 μC /ohm of resistance difference of two leads
2-wire RTD: 2.6 μC /ohm of resistance sum of two leads
Burn-out Current: 200nA
Common Mode Rejection Ratio (CMRR): 120dB
Normal Mode Rejection Ratio (NMRR): 55dB
Isolation Breakdown Voltage between channels: 430VAC min.
Sensor Break Detection:
Sensor opened for TC, RTD and mV inputs,
below 1 mA for 4-20mA input, below 0.25V for 1-5V inputs,
unavailable for other inputs.
Sensor Break Responding Time:
Within 10 seconds for TC, RTD and mV inputs,
0.1 second for 4-20 mA and 1-5V inputs.
|
Type |
Range |
Accuracy@
25 °C |
Input Impedance |
|
J |
-120 ~ 1000 °C |
±1 °C |
2.2MΩ |
|
K |
-200 ~ 1370 °C (-328 ~ 2498°F) |
±1 °C |
2.2MΩ |
|
T |
-250 ~ 400°C (-418 ~ 752°F) |
±1 °C |
2.2MΩ |
|
E |
-100 ~ 900 °C (-148 ~ 1652 °F) |
±1°C |
2.2MΩ |
|
B |
0 ~ 1820 °C (32 ~ 3308 °F) |
±2°C |
2.2MΩ |
|
R |
0 ~ 1768 °C (32 ~ 3214 °F) |
±2°C |
2.2MΩ |
|
S |
0 ~ 1768 °C (32 ~ 3214 °F) |
±2°C |
2.2MΩ |
|
N |
-250 ~ 1300 °C (-418 ~ 2372 °F) |
±1 °C |
2.2MΩ |
|
L |
-200 ~ 900 °C (-328 ~ 1652 °F) |
±1 °C |
2.2MΩ |
|
PT100 (DIN) |
-210 ~ 700 °C (-346 ~ 1292 °F) |
±0.4°C |
1.3KΩ |
|
PT100 (JIS) |
-200 ~ 600 °C (-328 ~ 1112 °F) |
±0.4°C |
1.3KΩ |
|
mV |
-8 ~ 70mV |
±0.05% |
2.2MΩ |
|
mA |
-3 ~ 27mA |
±0.05% |
70.5Ω |
|
0~1V |
-0.12 ~ 1.15V |
±0.05% |
32KΩ |
|
0~5V |
-1.3 ~ 11.5V |
±0.05% |
332KΩ |
|
1~5V |
-1.3 ~ 11.5V |
±0.05% |
332KΩ |
|
0~10V |
-1.3 ~ 11.5V |
±0.05% |
332KΩ |
Analog Input Cards (AI183V)
| Type |
Range |
Accuracy@
25 °C |
Input
Impedance |
| -60~60mV |
-62~62mV |
±0.1% |
2.2 MΩ |
| -2~2V |
-2.2~2.2V |
±0.3% |
332KΩ |
| -20~20 V |
-22~22 V |
±0.1% |
332KΩ |
| -20~20 mA |
-22~22 mA |
±0.1% |
70.5Ω |
Digital Output Card (DO181)
Channels: 6 per card
Contact Form: N.O. (form A)
Relay Rating: 5A/240 VAC, life
cycles 200,000 for resistive load
Analog Output Card (AO183I, AO183V)
Channels: 3 per card Output signal: AO183I: 4-20mA, 0-20mA, AO183V: 0-5V, 1-5V,
0-10V
Resolution: 15 bits
Accuracy:±0.05% of Span ±0.0025% /°C
Load Resistance: 0-500 ohms (current), 10K ohms minimum (voltage)
Output Regulation: 0.01% for full load change
Output Setting Time: 0.1 second (stable to 99.9%)
Isolation Breakdown Voltage: 1000VAC min.
Integral Linearity Error:±0.005% of Span
Temperature Effect:±0.0025% of Span /°C
24VDC Auxiliary Power Supply Card (AP181)
Channels: to be used for 6 transmitters
Output Rating: 24±1 VDC, 180mA in
maximum, 30mA / each channel
COMM Module (CM181)
Interface: RS-232 (1 unit), RS-485 or RS-422 (up to 247 units)
Protocol: Modbus Protocol RTU mode
Address:
1-247
Baud Rate: 0.3~38.4 Kbits/sec.
Measured data Bits: 7 or 8 bits
Parity
Bit: None, Even or Odd
Stop Bit: 1 or 2 bits
Standard Ethernet Communication
Protocol: Modbus TCP/IP, 10 Base T
Ports: AUI (Attachment Unit Interface) and
RJ-45, Auto- detect capability
Infrared Detector
Distance: Detect moving human body in distance around 2 meters
Time delayed: 10, 20, 30, 40, 50 or 60 minutes
to be defined
Real time clock accuracy vs. temperature inside of housing
Temperature inside housing typical error per month
10 ~ 40 °C 18 seconds
0 °C or 50 ° C52 seconds
-10°C or 60 °C 107 seconds
Environmental & Physical
Operating Temperature: 5 ~ 50 °C
Storage Temperature: -25 ~ 60 °C
Humidity: 20 to 80% RH (non-condensing), maximum relative humidity 80% for temperature
up to 31°C decreasing linearly to 50% relative humidity at 40°C
Altitude: 2000 M maximum
Insulation Resistance: 20 M ohms min. (at 500 VDC)
Dielectric Strength: 1350 VAC, 50/60 Hz for 1 minute
Vibration Resistance: 10-55 Hz, 10m/ s2for 2 hours
Shock Resistance: 30m/ s2(3g) for operation, 100g for transportation
Operation Position: no inclined restriction
Dimensions: Panel Mount style: 166(W) x 144(H) x 174mm(D)
Bench Top style: 166 (W) x 192 (H) x 194mm (D)
Standard Panel Cutout: DIN size in 138 x 138mm
Approval Standards
Safety: UL61010C-1,
CSA C22.2 No. 24-93
CE: EN61010-1 (IEC1010-1)
over voltage category II, Pollution degree 2
Protective Class:
IP 30 front panel for indoor use,
IP 20 housing and terminals
EMC:
Emission: EN61326 (EN55022 class A, EN61000-3-2, EN61000-3-3)
Immunity: EN61326 (EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11)
Other Description:
1 2 3 4 - 5 6 7 - 8 9 10
1 Power
4: 90-250 VAC, 47-63 Hz
5: 20-28 VAC, 47-63 Hz
6: 11-18 VDC
7: 18-36 VDC
8. 36-72 VDC
9: Special order
2 Analog Input Card
0: none
1: 1 channel withAI181
2: 2 channels with AI182
3: 3 channels with AI183
4: 4 channels with AI181 & AI183
5: 5 channels with AI182 & AI183
6: 6 channels with AI183
G: 3 channels with AI183V
H: 6 channels with AI183V
*See AI181/2/3(V) in Accessories below.
3 Digital Input Card
0: none
1: 6 channels
4 Digital Output Card
0: none
1: 6 relays
2: 12 relays
5 Communication
0: standard Ethernet interface
1: RS-232/422/485 ( three in one ) + Ethernet interface
9: special order
6 PC software
1: Free basic software Observer I for non-communication application
2: Extensive software Observer II for communication of RS-232/422/485 or Ethernet
7 Firmware
0: Basic function
1: with Mathematics, Counter & Totalizer & FDA 21 CFR part 11 compliance
8 Storage Media
1. 512 MB Compact Flash card
6: 1 GB Compact Flash card
X: other options
9 Case/Mounting
4: standard panel mounting, black case
5: Bench top / portable style with handle, USA power cable, black case
6: Bench top with handle, European power cable, black case
10 Special Option
0: none
1: 24VDC auxiliary power supply ( for transmitter, 6 channels )
2: 3-channel current output
3: 6-channel current output
4: 9-channel current output
D: 3-channel voltage output
E: 6-channel voltage output
F: 9-channel voltage output
5: panel mounting with rear power plug
6: panel mounting with front power switch
7: 7=1+5
8: 8=1+6
9: 9=1+5+6
X: other options
This is the detailed information for VR06 6 - channel paperless recorder. The information includes model, name, description and specification for VR06 6 - channel paperless recorder. Related Keywords : channel paperless recorder
Please send your Inquiries for VR06 6 - channel paperless recorder to us. We will contact you soon. Please also check out the related product categories below.