Brainchild Electronic Co., Ltd
Brainchild Electronic Co., Ltd. was established in 1977. Presently we are the largest temperature controller maker in Taiwan, and the only maker of paperless recorder in Taiwan. The factory has a full automatic SMT production line. TÜV Rheinland certified our ISO9001 once a year. In addition we have a well equipped and CSA certified laboratory to do CSA, UL and CE tests. A strong and experienced R&D team is allowed us to offer customers innovative and state-of-art industrial instruments for various FA solutions. We have won good reputation by supplying quality instruments with better features at competitive prices. It is our philosophy in pursuit of perfection through continuous improvement. In order to supporting our customers with more industrial instruments and becoming an important vendor in FA solutions, we have continued investing on new products. Now we have five product lines including Human Machine Interfaces, Recorders, Temperature Controllers, Data Acquisition Modules / Distributed IO Modules, and Networking products. The sales network of both distributors and private labeled customers cover over 80 countries.

NC200 & DL200

Categories > Temperature Controllers > Piping Controllers > NC200 & DL200

Product Name:

NC200 & DL200

Features:

The NC200 is a compact fuzzy logic plus PID temperature controller with J or K type thermocouple or RTD input. Multiple units (up to 247 units) can be networked together with 4P4C modular connector. Each unit auto-tunes on initial setup to provide the best response for each heater. The NC200 is powered by 90-250VAC supply and contains a solid state relay as its control output. The solid state relay can drive the heater directly through a plug-in connector. The major features of the unit are as following:
* COMPACT SIZE
* EASY INSTALLATION
* SELF ADDRESSING
* FAST COMMUNICATION SPEED

DL200 is a data logger which can connect up to 247 Network Temperature Controllers Model NC200. This unit can write all commands and read all data to and from each Network Temperature Controllers Model NC200 after equipping the unit with a HMI or PC via RS-232 port. The unit provides a dry contact which will be closed when one or more of the Network Temperature Controllers Model NC200 are outside of high and low limits or hardware failure occurs.

As a professional and experienced manufacturer, we supply high-performance and quality temperature controllers, which are also called temperature control, electronic temperature control, and electronic temperature controller.

FEATURES

Auto addressing, manual setting unnecessary
Network up to 247 controllers
The fastest speed, taking 1 second to update 1000 data
Used with SCADA, HMI via Modbus RTU
Quick connector for easy and safe wirings

-Top-

Specification:

NC200 ：

Power
90 ~ 250 VAC, 47 ~ 63 Hz, 800VA maximum

INPUT:

Type	Range	Accuracy	Input Impedance
J	-17.8°C ~ 500 °C ( 0°F ~ 932 °F )	±2 °C	1MΩ
K	-17.8°C ~ 500 °C ( 0°F ~ 932 °F )	±2 °C	1MΩ
PT100 (DIN)	-17.8°C ~ 500 °C ( 0°F ~ 932 °F )	±1 °C	1.3KΩ

Output (Solid state relay)

Relay Rating : 7A @25 C, 3.5A @47.5 C ambient temperature,
90 ~ 250 VAC, 47 ~ 63Hz.
See Fig.16 Load derating curve
Switch ON-OFF: Zero crossing triggering
Insulation resistance: 1000 Mohms min. at 500 VDC
Dielectric strength: 2500 VAC for 1 minute.

Data Communication
Interface : RS-232 ( 1 unit ), RS-485 ( up to 247 units )
Protocol : Modbus Protocol RTU mode
Address : 1 - 247
Baud Rate : 2.4 ~ 38.4 Kbits/sec
Parity Bit : None, Even or Odd
Stop Bit : 1 or 2 bits
Communication Buffer : 64 bytes

Control Mode
Action Reverse (heating)
PID mode:
       PB= 1-500 °C
       TI= 1-900 sec.
       TD= 0-300 sec.
Cycle time: 2 seconds
Manual control: 0-100%
Auto-tuning: Cold start and warm start
Power limit: 0-100%

Environmental & Physical
Operating Temperature : -10°C to 50°C
Storage Temperature : -40°C to 60°C
Humidity : 0 ~ 90 % RH ( non-condensing )
Altitude : 2000m maximum
Insulation Resistance : 20 Mohms min. ( at 500 VDC )
Dielectric Strength : 1350 VAC, 50/60 Hz for 1 minute
Vibration Resistance : 10 - 55 Hz, 10 m/s² for 2 hours
Shock Resistance : 200 m/s² ( 20 g )
Dimensions :
NC200 --- 50.3(W) x 52.4(L) x 45(H) mm

Weight --- 112 grams

Approval Standards
Safety : EN61010-1

Protective Class : IP 20

EMC : EN61326

DL200 ：

Power
90~250 VAC, 47~63 Hz, 3VA, 1W maximum

Alarm
Alarm Relay: Form A, Rating 2A/240VAC, life cycles 200,000 for resistive load.
Alarm Function: low alarm or high alarm or hardware failure or sensor break occurs for any unit on line.
Alarm Indicator: Red color

Interface
Master Side: RS-232
Slave Side: RS-422

Data Communication
Master Side:
Protocol: Modbus Protocol RTU Mode
Address: 20 (fixed)
Baud Rate: 38.4 Kbits/sec
Data Bit: 8 bits
Parity Bit: Even
Stop Bit: 1 bit
Reading Speed: 60ms for reading one word of data for 100
units, 480ms for reading 4 words of data for 200 units.

Master Side:
Interface: Differential driver/receiver
Protocol: Proprietary protocol
Baud Rate: 92.16 Kbits/sec
Reading Speed: 4ms/unit (reading 14 words per unit )
Writing Speed: 3.5 ms for writing 10 words
1.5 ms for writing 1 word.

Environmental & Physical
Operating Temperature : -10°C to 50°C
Storage Temperature : -40°C to 60°C
Humidity : 0 ~ 90 % RH ( non-condensing )
Altitude : 2000m maximum
Insulation Resistance : 20 Mohms min. ( at 500 VDC )
Dielectric Strength : 2300 VAC, 50/60 Hz for 1 minute
Vibration Resistance : 10 - 55 Hz, 10 m/s² for 2 hours
Shock Resistance : 200 m/s² ( 20 g )
Dimensions : 102.5 (L) X 80 (W) X 30 (H) mm
Weight --- 120 grams

Approval Standards
Safety : EN61010-1

Protective Class : IP 20

EMC : EN61326

Other Description:

NC200 - □□□□
1 2 3 4

1 Power Input
4: 90 ~ 250 VAC, 47-63 HZ

2     Signal Input
               1: Standard Input
                   Thermocouple: J, K
                   RTD: PT100 DIN
               9: Special Order

3 Control Output
3: Solid State Relay, 3A/250VAC

4    Options
               0: °C
               1: °F
Standard ordering code = NC200-4130

DL200 - □□□□
1 2 3 4

1 Power Input
4: 90 ~ 250 VAC, 47-63 HZ

2 Alarm Output
1: Form A Relay,2A/250VAC

3    Communication
               1: RS-232, Modbus protocol
               2: Special order

4 Options
0: No special option
Standard ordering code = DL200-4110

This is the detailed information for NC200 & DL200. The information includes model, name, description and specification for NC200 & DL200.

Please send your Inquiries for NC200 & DL200 to us. We will contact you soon. Please also check out the related product categories below.

Designed by Web Builder & Trade Associated with AsianNet
Address： 6F, No.209, Chung Yang Rd., Nan Kang Dist. Taipei, 115,Taiwan (R.O.C.)
Tel： 886-2-27861299 Fax： 886-2-27861395
E-Mail：sales@brainchild.com.tw
Technical support email：service@brainchild.com.tw